I experimented with transferring an image onto fabric the other day. For my test, I used this completely adorable dachshund drawing by Kayanna Nelson of June Craft. The little fellow is downloadable for personal use at Bloesem Kids. To try an image transfer, you'll need:
Acrylic gel medium, available at art stores
Fabric
A laser printed image (not inkjet!)
With your finger—or a brush, but I prefer to feel what I'm doing—spread gel medium onto your fabric in the area where you want your image. Not too thin, not too thick; just a nice even layer.
Place your image printed side down onto the sticky fabric and press firmly. Burnish the paper with your thumbnail a bit to be sure the image makes good contact with the fabric. Let it dry completely.
Dampen the paper with water, then gently rub the paper away from the image with your finger.
The resulting fabric will be a bit stiffer where the gel medium was applied, and you'll be able to see it faintly. I sewed my print into a mini drawstring doggie bag, sized so the area with gel ends near the seams. This way the entire front of the bag is the same stiffness. It's quite cute!
For a good drawstring bag tutorial, check out this one at Skip To My Lou. Since my bag is tiny, I laid the baker's twine inside the top channel before stitching it down, rather than threading it through later.
Tidak ada komentar:
Posting Komentar