How to make fabric panel wall art

Here's how to make a giant piece of wall art for your room.

Choose some fabric with a large-scale pattern. Go to your local art supply store and buy 4 lengths of wood frame made for stretching canvas. The wood strips have corners designed to interlock. (Or you can cover an existing blank stretched canvas, but it will get pricey if you go very big.)

At my local art store the wood strips were standing in bins, available in lengths all the way from super short to too long to manage. I bought 2 each of 50" and 34." Each piece was just a couple bucks. Push the corners together, pounding them with a hammer if needed. Cut your fabric to a size somewhat larger than your frame; you'll need enough to wrap around to the back. Iron the fabric; wrinkles will show!

Position your fabric the way you like it and use a staple gun to tack it down. I stapled along a long edge, then did the opposite side, pulling it very tight. Next do the short sides, one at a time. Trim off any extra fabric that hangs past the inner edges of the frame. To finish the corners, tuck in the extra fabric as if you're wrapping a present and then staple it down. It doesn't matter how you do it as long as it looks tidy from the front. The art store gave me a wooden tool to help with this, but it's not essential. Attach a picture hanger (or maybe two if your panel is large) and hang.

This fabric is Pernilla from Ikea, now discontinued.